Instructions of uWear Flashing

WARNING!Installation process will remove all the data from you device. Please, if you have an important data on your device, backup your files. To avoid complications and software instability during OTA update and update via PC, please, take out a memory card from your device.

Driver installation manual written for Windows 7 OS. If you experience some difficulties during the Driver Installation on the other OS, please, skip the Step 1, and instead follow the links listed below and follow the instructions:

Windows 10 Driver Installation Manual (Choose this one if you have Windows 10) -


Windows 8 Driver Installation Manual (Choose this one if you have Windows 8) -


Dissabling Driver Signature Inforcement (If required) -


The latest rom is in this package, therefore no need to download it from website.

1.Download uWear Flash folder and depress it.

2.Copy the mdmcpq.inf file to C:\Windows:\inf and copy usbser.sys file to C:\Windows:\System32:\driver.

3.Install the driver.

4. Turn off uWear and connect it to your computer.

5.Make sure you can see MTK USB Port in your Computer Management -- Device Manager -- Disk Manager.

6.Disconnect uWear from your computer.

7.Open the MultiPortFlashDownloadProject.exe

8.Click “file” -- “Open download agent file” - and import MTK_AllInOne_DA.bin

9.Click “Image folder” and import the following folder under the uWear Flash folder

10.Check the following 2 options but don’t change other options.

11.Press Start All button and then connect the uWear to computer again (make sure that uWear is power off before connection).

12.Wait for the procedure to complete itself.

Tips: After flashing the firmware, if you get a black display, just wait until the display sleeps and then charge and restart the watch.

    Follow us